Was ist mySTOPY?

mySTOPY hilft Dir, die Sicherheit Deiner Liebsten zu erhöhen. Die in wenigen Minuten montierte Bremsvorrichtung für Laufräder reagiert per Knopfdruck und bremst das Laufrad bis zu einer Reichweite von 100 m sicher ab.

Der positive Nebeneffekt? Durch das kontrollierte Eingreifen lernt das Kind mit der Zeit, Gefahrensituationen besser einzuschätzen.

Bekannt aus

Which mySTOPY balance bike brake fits your balance bike?

mySTOPY is only compatible with PUKY balance bikes and fits the LR M, LR 1L, LR 1L BR, LR 1 models.

If you own the LR XL model or are unsure which mySTOPY fits your wheel, please contact us before ordering.

You can find the model of your PUKY balance bike on the type plate , which is located on the back of the seat tube under the footboard, or visit our selection guide.

selection guide Contact us Sende ein Foto

So funktioniert mySTOPY

Step-1

Um deinen mySTOPY anzuschalten, halte die Fernbedienung direkt an das Rücklicht und betätige den Knopf für 2-3 Sekunden (Fernbedienung sollte das Rücklicht berühren). Die Rückleuchte dimmt auf und bleibt an. Dein mySTOPY ist nun an.

Step-2

Teste die Funktion deines mySTOPY durch Betätigen der Fernbedienung - Hierbei fällt das Bremselement auf den Reifen und die Rückleuchteblinkt.

Step-3

Ziehe das Bremselement wieder nach oben. Somit ist es arretiert und bereit für deine Fahrt.

Step-4

Geschafft! Nun ist dein mySTOPY startklar. Nicht vergessen: Um den Akku deines mySTOPY zu schonen, denke daran, ihn nach jeder Fahrt wieder auszuschalten. Hierzu hältst du die Fernbedienungganz nah an das Licht und hältst die Fernbedienung für einige Sekunden gedrückt. Das Licht dimmt kurz auf geht dann aus.

So montierst du mySTOPY

Step-1

Löse mit einem
Innensechskantschlüssel (5mm) die Sattelklemme -die Schraube bleibt in derSattelklemme. Nehme den Sattel, samt Sattelstütze und Klemme vom Laufrad.

Step-2

Stecke deinen mySTOPY
auf das Sattelrohr.

Step-3

Platziere die Sattelklemme wieder auf dem Sattelrohr und positioniere den Sattel samt Sattelstange wieder auf die Position, die dein Kind benötigt. Jetzt mit dem Sechskantschlüssel durch die vorgesehene Aussparung die Sattelklemme
wieder anziehen. Fertig!

Step-4

Dein mySTOPY ist montiert? Wie du ihn anschaltest, erfährst du im nächsten Schritt unter "So funktioniert mySTOPY"

Easy assembly

  • Remove the saddle

The bolt for securing the caliper must remain in the clamp nut, as it does not fit through the hole in the brake assist.

  • Attach mySTOPY
  • Reassemble the saddle

weitere Produktdetails

POSITIVER LERNEFFEKT & BESONDERHEITEN

mySTOPY ermöglicht es dir, bei Bedarf einzugreifen

Du kannst abschätzen, wann eine Situation gefährlich für Dein Kind werden könnte und es nicht mehr rechtzeitig reagieren kann. Ist Dein Kind zu schnell unterwegs und sieht das heranfahrende Auto nicht? Könnte es eventuell zu einer Kollision mit einem Baum oder anderen großen Gegenständen kommen?

Für diese Situationen haben wir mySTOPY entwickelt

So kann Dein Kind dennoch die für seine Entwicklung wichtigen Erfahrungen sammeln – aber eben sicher! Nehme Dir die Zeit und erkläre Deinem Kind, warum Du es abgebremst hast. So bekommt es ein Gefühl für Verkehrssicherheit und lernt, zukünftig besser auf Gefahrensituationen zu reagieren.

Bewusst konstruiert für weniger Wartung

Die Lockere Führung des Bremselements stellt keinen Mangel des Produkts dar, sondern wurde bewusst so konzipiert.Hierdurch setzten sich in den Führungen weniger Verschmutzungen an, da diese durch die Bewegung besser „freigerieben“ werden können, was nahezu einen wartungsfreieren Betrieb ermöglicht.

Passgenaue Lösung für jedes Laufradmodell

Das Standardbremselement passt für alle angegebenen Laufräder. Aufgrund der Fertigungstoleranzen des Laufradherstellers kann es zu einem „Schleifen“ des Bremselementes kommen. Hierfür haben wir ein Repertoire an Sonderbremselementen, welches wir Ihnen gerne auf Anfrage kostenfrei bereitstellen.

FAQs

Your question isn't there?

No problem! Contact us, and we'll be happy to answer any questions you have about mySTOPY. Go to the contact form >

Can the wheel roll over when braking?

No, mySTOPY is mounted on the rear wheel and only brakes the rear wheel .
There is no risk of rollover. Of course, we
extensively tested using simulations and test drives.

With mySTOPY we have designed a brake assistant that – like all
braking systems – is used consciously. Therefore, it is also important to
fundamental consideration: What provides more security – The
Activating mySTOPY or failing to do so.

That is why we recommend: Whether cornering, downhill, wet, etc.: The braking behavior
must be adapted to the respective situation. For example, we recommend
When using mySTOPY, always activate the brake assistant in advance, e.g. on various
surfaces to get a feel for the braking behavior.

The braking behavior itself depends on many factors, such as
Example: surface and tire conditions, how fast the child is driving,
Braking in curves, etc.

A loss of stability that could occur due to braking could
This can occur especially when braking in curves. Therefore, when cornering, braking should be
This physical effect is also known from bicycles/motorcycles.

In general, however, a breaking rear wheel can be better controlled
and avoid a fall, as if the front wheel locks.

Does the brake assistant also fit other balance bike models?

Our wireless brake only fits the common PUKY balance bike models - see here.

The remote-controlled brake is not compatible with balance bikes from manufacturers such as Woom, Berg, Kokua, Affenzahn, Lionelo, Decathlon, Globber, Kinderkraft, etc.

How was mySTOPY tested?

With the help of the simulation, we were able to show that the child does not feel the braking effect and there is no risk of rollover.

Test conditions under extreme conditions (max. weight and speed):

- Weight 25 kg - Max. permissible weight according to wheel manufacturer

- Speed ​​15 km/h & 30 km/h - Regular speed +/- 10 km/h

- Frictional resistance index 1.08 (dry concrete)

Result:

- Max. resulting deceleration force on body: 0.52 g (15 km/h)

Should I use the brake when my child is out of reach?

No. You should only activate mySTOPY when your child is within sight, as this is the only way to ensure that the balance bike comes to a safe stop.

What is the sustainability status of mySTOPY?

When it comes to sustainability, our hearts beat even faster:

Because mySTOPY is made for children, we promote sustainability from material selection to packaging:

Our plastics are made from at least 60% recycled materials, and the instruction manual and packaging materials are made from recycled paper.

That's not enough for us, and we're working to consistently increase this percentage further. We avoid unnecessary packaging materials.

The product packaging is also the shipping packaging, so we save one box per shipment and thus conserve natural resources.

Naturally, our paper and cardboard packaging are made from recycled paper. Our suppliers are located locally, which means we can avoid long and unnecessary delivery routes.

The electronic modules are delivered in special reusable packaging. With each delivery, the empty reusable packaging is exchanged for the full one. This way, we reduce unnecessary packaging waste.

Regional sourcing: For us, "Made in Germany" isn't just a label, it's a fact. We source all components and materials from Germany. Unfortunately, a few electronic components (such as the battery) can only be manufactured in Asia. We generate the electricity for our site using our PV system.

Why is there no charging cable included?

Since we attach great importance to sustainability, we have decided to include
to do without a charging cable.

This is one of our contributions to reducing our carbon footprint on the environment. You can find more information about sustainability at mySTOPY on our website in the FAQs under "What's the status of sustainability at mySTOPY?"

Most people already have the necessary accessories at home, so we are convinced that the delivery
without charging cables can help minimize the growing problem of electronic waste.

As a mySTOPY user you can
Simply continue using a compatible charging cable you already have at home. Otherwise, you can purchase one at any electronics store if necessary.

Am I hindering my child from having his or her own experiences?

mySTOPY allows you to intervene when necessary. When necessary. As a supervisor, you can assess when a situation could become dangerous for your child and they are unable to react or act in time. Is your child driving too fast and doesn't see the approaching car? Could they possibly collide with a tree or other large object? We developed mySTOPY for situations like these. If you keep this in mind, your child can still gain important developmental experiences – but safely! Take the time to explain to your child why you slowed down – this way they will develop a sense of road safety and learn to react better to dangerous situations in the future.

Why can't I turn off my mySTOPY?

To turn off the brake assist, you must hold the remote control very close to the light and hold it down for a few seconds .
The light will then dim briefly and then dim completely. Then the brake assist will be off. To turn it on, proceed in the same way: Hold the remote control directly to the light; it will flash briefly. Then press the remote control again and hold it to the light for a few seconds; it will dim briefly and
then your mySTOPY is ready to go again.

What is the battery life of mySTOPY?

A single battery charge allows you to take up to 6,500 shots . The battery lasts for 250 days in off mode and approximately 105 hours in on mode.

Can I pair multiple mySTOPY or remote controls?

Yes! You can pair up to four remote controls with one mySTOPY and an unlimited number of mySTOPYs with one remote control.

How do I find out which PUKY balance bike model I have?

You can find the model of your PUKY balance bike on the type plate - this is located on the back of the seat tube under the footboard .

An- und Ausschalten
  • Einfach die Fernbedienung direkt an das Rücklicht halten und für ca. 3 Sekunden gedrückt halten
Schraube in der Klemmmutter
  • Die Schraube zum feststellen des Sattels muss in der der Klemmmutter bleiben. Die Schraube passt nicht durch das Loch im Bremsassistenten
Wie lange hält der Akku

Mit einer Akkuladung kannst du bis zu 6.500 Auslösungentätigen. Im Offmodus bietet der Akku eine Laufzeit von 250 Tagen, im Onmodus ca.105 Stunden.

5 Minuten, fertig los

Vielfach ausgezeichnet

Persönlicher Service

30 Tage Geld-zurück-Garantie